1 of 2 072308 description the ds9094f i button pcb clip holds an i button and connects to a printed circuit board. by deflecting the spring clip in the molded housing, an i button can be inserted and extracted without special tools. if reverse insertion is attempted, the beveled edge on the housing prevents contact. features ? low-cost holder for f5 size i button (see ds9094sm for f3 holder) ? printed circuit board mount ? contacts are gold plated ? flammability rating: ul94v-o ? two versions: ? ds9094f for f5 size i button ? DS9094FS for surface mounting f5 size i button ordering information part temp range pin-package ds9094f+ -40c to 85c 1 through-hole mount f5 can DS9094FS+ -40c to 85c 2 surface mount f5 can 1 note: wave- or hand-solder only; do not reflow. 2 note: hand-solder only; do not reflow. + denotes lead-free compliance. insertion of ibutton dat a ground recommended pad si ze DS9094FS bot t om sur f ace of met al cont act s t o be 0 t o 0. 13 bel ow t he seat i ng pl ane of t he pl ast i c suppor t s at al l poi nt s recommended hol e si ze ds9094f 0. 97 di a. fi ni shed hole 2pl. all dimensions in millimeters. ds9094f i button pcb clip www.maxim-ic.com i button is a registered trademark of maxim integrated products, inc.
ds9094f 2 of 2 revision history revision date description pages changed 051606 original release ? 072308 updated the soldering notes. 1
|